ENERLIN X I/O APPLICATION MODULE

This I/O module is an Input/Output application module and it is part of EnerlinX communication system. This I/O module is compatible with Masterpact, Compact and PowerPact devices. It is used for protection, circuit breaker control, motor control, energy management and monitoring applications. It provides six digital inputs, three digital outputs and one analog input. It is equipped on the top with one 24VDC screw clamp terminal block and one terminal block for the 6 digital inputs. There are two RJ45 sockets on the bottom for ULP, and 4 terminal blocks for the digital outputs and analog input. The I/O module is a DIN rail mounting device and its dimensions are 72mm x 116mm x 71mm. The protection degree is IP4x on the front face and IP2x on the connectors. The I/O module is entirely part of the EcoStruxure Power architecture and Ethernet ready smart panels. The I/O module can be configured and updated (firmware) using EcoStruxure Power Commission software.

Specification

Documents

• Declaration of conformity - EU-Declaration-PB16032220B-IFE interface
• Circularity Profile - I/O (input/output) application module, Enerlin'X - End of Life Instructions
• Environmental Disclosure - I/O (input/output) application module, Enerlin'X - Product Environmental Profile
• Instruction sheet - Enerlin'X IO module - Input/Output interface for LV circuit breaker - Instruction sheet
• User guide - Enerlin’X IO Input/Output Application Module for One IEC Circuit Breaker User Guide
• Catalog - MasterPacT MTZ MicroLogic Active Catalog 2025 - Air Circuit Breakers